|
We also accept:
|
|
Rexxer Aprilia Shiver 750
with ECU Type Magneti Marelli IAW 5DM
449,00 €*
Delivery time
approx. 3-5 work days
RexXer ECU Tuning
So far the most applied method for adjusting the fuelling map of a bike is the installation of an auxiliary module. With this approach the user must consider the following criteria:
1.Complex installation at vehicles with lining.
2.The installation of additional hardware means that there is more possible sources of error.
3.The auxiliary module is dependent on the signals that the original ECU receives. This causes a timedelay (even if only milliseconds) between the signal receivers and the information received by the auxiliary module (injection nozzles, butterfly valve potentiometer, etc.). Thus 100% optimal mapping is not attainable.
4.An influencing control on injection timing and Spark Advance in "real time" is not possible.
5.When increasing the rev limiter by means of an auxiliary module it is not possible to redefine the fuelling, which can lead to fuelling problems and preignition. These parameters are copied from the rev limit of the original map into the inreased range. Therefore the increased rev range is not mapped to attain optimal performance.
6.There is no possibility to deactivate or modify the parameters of the Lambda probe.
7.The exhaust - discharge opening control cannot be deactivated.
With the RexXer all of the above issues are solved whilst offering a simple but effectve remapping of the ECU.
|
Rexxer Aprilia Shiver 750
with ECU Type Magneti Marelli IAW 5DM
|
|
449,00 €*
incl. VAT, plus shipping
|
|
|
« back to overview "Rexxer ECU mapping Aprilia Tuning"
|
|
|
